Steper Motor AM3248

Steper Motor AM3248

With its speed and torque, the new AM3248 stepper motor from FAULHABER raises the bar in terms of performance and dimensions.

Offering up to 10,000 rpm, it can achieve five times the speed of comparable stepper motors. Combined with a gearhead reduction of 100:1, it supplies a torque of 5 Nm. The motor delivers these values with a diameter of just 32 mm. This makes it ideally suited for a wide range of applications in areas such as aerospace, laboratory automation, large optical systems, the semiconductor industry, robotics and 3D printing.

27 …BA

Technical Data

AM3248

Nom. curren

0,7

A

Nom. Holding Torque

85

mNm

Boost current 

1,4

A

Boost Holding Torque

152

mNm

Temperature range

-30 ... 70

°C

Max. speed

10 000

rpm

Max axial load @5000 rpm

10

N

Full step angle

7,5

°

Powerful and extremely miniaturised

Powerful and extremely miniaturised

With the new MC3001 motion controllers, available as MC 3001 B (board-to-board connectors) or MC3001P (28-pin plug connector), FAULHABER completes the MC V3.0 generation of controllers for smaller motor series.

The controllers are extremely miniaturised and, with 1.4 amperes in continuous operation and up to 5 amperes peak current, are very powerful. They are designed as slaves for control and positioning tasks of DC-micromotors, linear DC servomotors or brushless DC-motors.

The new MC 3001 are unhoused versions of the FAULHABER motion controllers and, by means of the integrated output stage with optimized current measurement, can control DC-micromotors, linear DC-servomotors or brushless DC-motors from the FAULHABER product line from 6 to 30 millimeters. They are configured here via the FAULHABER Motion Manager software V6 (version 6.8 and higher). The very good EMC behaviour of the new motion controllers has been certified by external laboratories.

zástavbových rozměrů a nekompromisními požadavky na řízení.

MC 3001 B; MC 3001 P; relase

Technical Data

MC 3001 B/P

Electronic supply

6...30

V

Motor supply

6...30

V

Max. continous output current

1 (B) / 1,4 (P)

A

Temperature range

-40...+85

°C

Dimensions

16x27 (B) / 23x30 (P)

mm

Peak current

5

A

Mass

2/5

g

For configuration via

Motion Manager 6.8

-

For combination with

DC, BL, and LM motors

-

Interface

RS232, CANopen, USB

-

Integrated referencing with AEMT

Integrated referencing with AEMT

In combination with brushless DC-servomotors, the new magnetic AEMT-12/16 L absolute encoder delivers absolute angle information with a preset multiturn resolution of 16 bits (65536 revolutions) and a singleturn resolution of 12 bits (4096 steps) for commutation, speed control and motion control.

This position data can be queried by a SSI Interface with BiSS-C Protocol. With a line driver, the interface is designed differentially and is based on the RS422 standard. It is thereby possible to position the motor/encoder unit up to five metres away from the controller.

The BiSS-C protocol is designed for industrial applications in which high transmission speed, flexibility and minimal implementation effort are required. Digital Hall sensors for commutation of the motors are no longer generally needed. With AEMT, sine commutation is possible as is very efficient operation of the motor with minimal torque ripple.

AEMT

Technical Data

Series AEMT-12/16 L

Lines per revolution

4096

-

Supply voltage

4.5 … 5.5

V

Signal Output

SSI interface with BISS-C protocol

-

Current cons.

typ. 22, max. 35

mA

Temperature range

-40 … +100

°C

Battery voltage

3 ... 5.5

V

Stepper Motor DM66200H

Stepper Motor DM66200H

With its DM66200H series, FAULHABER is opening up a whole new dimension in performance for motors with internal opening (aperture).

As a direct drive, the new hollow shaft motor operates backlash-free and can be integrated into different applications with very limited effort. It achieves impressive performance values in terms of both speed and torque. Its exceptionally wide aperture has a diameter as large as 40 mm! The drive is characterised by low weight and an extremely slim design. Thanks to minimal wear (bearing only), it is ideal for maintenance-free continuous operation. 

DM66200H

Technical Data

DM66200H

Technical Data

1

A

Nom. Holding Torque

307

mNm

Boost current

2

A

Boost Holding Torque

581

mNm

Temperature range

-30 ... 70

°C

Max. speed

2000

rpm

Max axial load @2000 rpm

100

N

Full step angle

1,8

°

FAULHABER catalogue 2020-2021

FAULHABER catalogue 2020-2021

A FAULHABER Drive System is more than the sum of its components. When application engineers combine FAULHABER products with one another, the overall performance of the system improves.. This is the FAULHABER principle of perfectly optimized parameters and interfaces for compact, integrated, high-performance drive system solutions.

On 650 pages, FAULHABER presents the most comprehensive portfolio of highly developed miniature and micro drive technology that is available from a single source worldwide in the new 2020-2021 catalogue. 

If you would like deliver catalogue in printed form, please contact us.

e-Paper catalogue